SM3 Twin X-Series

Campetella EVO is a CNC control unit featured by last generation hardware and software that assures the most advanced functions for maximum control. Through a light and ergonomic interface, it allows to easily program and manage all the robot’s functions.
Would you like to get to know more about the EVO console?

SM3 Twin X-Series requires no external palletizing axis with the related gripping system, typical of the traditional side-entry robots. Long strokes on all axes, together with a built-in wrist, allow the pick-up, placing and palletizing operations to be performed sequentially with a single gripping system. Both the programming and management of the robot are extremely simple and allow to avoid any simultaneous coordination with an external palletizing axis.

Transferring parts to different gripping systems is a very delicate process, especially in multi-cavity applications, where misalignments and piece-droppings are more frequent. By using a single gripping system it’s possible to avoid these inconveniences and the related possible downtimes and productivity loss.

With traditional side-entry robots, the position of the palletization axis heavily limits the pick-up side on the fixed or moving surface of the press. The absence of a palletizing axis, combined with a tilting wrist, allows the SM2 Twin X-Series robot to quickly invert the pick-up side on the fixed or moving surface, allowing high levels of flexibility in the context of production with mould changes.

Its long strokes on all axes translate into the best centering capacity and the possibility for the robot to be used with IMMs and moulds of different dimensions

SM3 Twin X-Series is equipped self-lubricating sliding blocks with roll-by balls on carbon steel prismatic guides. Thanks to this system, the robot runs for more than 40,000 km without needing guides’ lubrication, thus minimizing both maintenance and machine downtimes.

The robot has a wrist with a pneumatic C axis that allows flat placement of parts picked up in the mould. It is possible to choose between two different programmed positions (vertical/horizontal). The maximum payload is 12 kg.